Need Help with MS4 Dual QD Sling Gen2 Installation Tips!

Firearm Accessories
1

Introduction

If you’ve got your hands on the Magpul MS4 Dual QD Sling Gen2, you’re probably already aware of how versatile and functional this tactical sling can be. However, installation can sometimes be tricky, especially if you want to ensure that it’s set up correctly for optimal use. This tutorial will walk you through the step-by-step process of installing the sling on your firearm.

What You’ll Need

  • Magpul MS4 Dual QD Sling Gen2
  • A firearm that has QD (Quick Detach) sockets
  • A flat surface for installation
  • Optional: A buddy to help you out or check your setup

Step-by-Step Installation Guide

  1. Identify the QD Points: First, locate the QD points on your firearm. Most modern firearms have these installed, but if you don’t see them, you might need to consider purchasing QD mounts.

  2. Attach the Sling to the Front of Your Firearm:

    • Start with the front attachment point. Insert the QD swivel of the sling into the QD socket.
    • Make sure it clicks into place securely.

  3. Adjust the Length of the Sling:

    • Before moving to the rear, adjust the strap length to suit your preference. It’s vital that the sling is not too tight or too loose when it’s on you.
    • You can adjust the length by pulling the webbing through the slider.

  4. Attach the Sling to the Rear of Your Firearm:

    • Now, attach the QD swivel to the rear QD socket in the same manner as the front. Ensure it’s secured properly.

  5. Final Adjustments:

    • Stand up and put your firearm on. Pick it up as you normally would and check if the loop is comfortable. Adjust the length further if necessary.

  6. Test the Sling:

    • Move around and ensure that the sling stays in place. You want to ensure it allows for quick transitions and does not tangle.

Tips for Optimal Use

  • Practice with the Sling: Familiarize yourself with how the sling operates when mounted on your firearm. Practice adjusting the length, quick transitions, and using it in various positions.
  • Secure Storage: When not in use, make sure to store your firearm with the sling properly secured to avoid tangles or damage.

Conclusion

The installation of the MS4 Dual QD Sling Gen2 is straightforward if you follow these steps carefully. Remember, practice makes perfect! If you have any further questions or your installation doesn’t seem right, feel free to ask here.

Sharing your own experiences or tips below will also help others looking to install their sling. Happy shooting!

2

I’m looking for some guidance on the installation of the MS4 Dual QD Sling Gen2. What components should I focus on first?

3

Definitely start by understanding the sling types and attachment points. The MS4 has both QD and traditional attachment methods, which are crucial for installation.

4

The adjustment mechanisms are really important too! Make sure you are comfortable adjusting the length for your specific use case.

5

Great point, hwhitaker! I found the adjustment process a bit confusing initially. Any tips on how to get it right?

6

Just focus on the adjustment tabs. Pull them gently to reduce tension while making adjustments – it makes everything smoother!

7

I’ve seen discussions about attachment points. Can anyone clarify where the QD mounts typically go?

3 Likes
8

Usually, the QD mounts go on the rear and forward parts of your firearm. This allows for versatile carry options.

8 Likes
9

Exactly, and having those attachment points right makes a huge difference in comfort level when carrying! Anyone else have experience with tricky mount placements?

10

I struggled with the rear mount initially. Just ensure the sling doesn’t twist when mounting!

11

I appreciate all the insights! I would advise practice using dummy guns before installation. It really helps to visualize everything.

12

Good idea, sanchezashley! Practice is key. And remember, if you mess up, you can always reinstall! Just think of it as a fun project.

7 Likes
13

Haha, true! Installation can practically become a bonding exercise. Just be careful not to break anything, right?

4 Likes
14

What if you accidentally installed it incorrectly? Wouldn’t it be a hassle to remove all the attachments?

15

It can be a hassle, but just take your time and double-check everything beforehand. Better safe than sorry!

16

To install the MS4 Dual QD Sling Gen2, you’ll need a torque wrench, a 1/8" Allen key, and some Loctite for the screws. It’s crucial not to overtighten to avoid stripping the screws.

17

Great tips! I’ve also found that laying out all your tools beforehand can make the installation process much smoother and more organized.

18

When installing, make sure you check the orientation of the QD sockets. I’ve seen many people install them incorrectly, which leads to a tricky adjustment later on.

19

This is really important! A little misalignment can lead to discomfort when carrying your gear for long periods.

20

Don’t forget to check your rear sling attachment point! It’s a common mistake to overlook it during installation. Regularly inspect it for wear afterwards too.